Have a problem? Call us (+61) 7-4955-4644
Work with us? Send email sales@pipeandbuoy.com.au

WearPro+ Sheets

Sheets

Available in any colour. Products can be machined and manufactured to order, with the following sheet moulds available:

6050 X 1830, 6000 X 1220, 5040 X 1340, 4960 X 1460, 4730 X 1240, 4550 X 2000, 4400 X 2050,
4400 x 2000, 4000 X 1100, 4000 x 1000, 3050 X 3050, 3050 X 1230, 3050 X 1220, 3050 X 1550,
2800 X 1300, 2440 x 1220, 2000 x 1000, 1000 x 1000

Thickness upto 350mm

Case Studies

Stocklist

PropertyRaw Material Values Only
PHYSICAL PROPERTIES
Raw MaterialWearPro+
Density (kg/m3)≥ 930
Water Absorption 24hrs(%) <0.01
MECHANICAL PROPERTIES
Tensile strength at Break (Mpa)≥ 24
Elongation at Break(%)≥ 280
Impact strength(KJ/㎡)≥ 70
Wear Loss (Factory test) < 23%
Coefficient of Friction (unplaned)0.12
Shore Hardness( R)61- 68
THERMAL PROPERTIES
Coefficient of Linear Expansion(10-4)1.5
Heat Deflection Temp at 0.45 Mpa(℃)≥ 50
ELECTRICAL PROPERTIES
Surface Resistivity(Ohm)1109Ω
CHEMICAL PROPERTIES
Hydrochloric AcidNo abnormal in the sample surface immersed in 20℃-80℃ of hydrochloric acid
Phosphoric AcidNo abnormal in the sample surface immersed in 20℃-80℃ of phosphoric
93# gasolineNo abnormal in the sample surface immersed in 20℃-80℃ of 93#
Acetic acidNo abnormal in the sample surface immersed in 20℃-80℃ of glacial acetic acid
Sodium hydroxideNo abnormal in the sample surface immersed in 20℃-80℃ of sodium hydrox-
502 super glueNo bonding between samples surfaces